Aggie Tradition Custom Smoker Trailer
$17,821.44
Trailer:
-
Built to last!
-
Brand new 6’ x 11’ single-axle trailer with 2000-lb jack.
-
5200-lb trailer axles and springs
-
All new lights and wiring.
-
All new 15-inch wheels and tires
-
Well-weighted for towing.
-
Trailer painted color of your choice.
-
Spare tire and spare tire carrier mounted underneath the tongue of the trailer.
Smoker:
-
Painted with high-temperature black BBQ paint.
-
Reverse smoker design uses two plates to transfer smoke and heat.
-
7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.
-
Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from the top, dead center, which also cuts down on the weight.
-
When a door is opened, heat remains in the pit
-
Pit will hold a steady temperature all day long.
-
Grease drain
-
The ax handles on the top of the pit function as doorstops; they are a unique and sturdy feature.
-
The pit is mounted well to the trailer, and components are fully welded.
-
Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
-
All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.
Smoke Stack:
-
6-inch x 28-inch smokestack (schedule 40).
-
Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handle.
Firebox:
-
2-ft long and 2-ft wide by 18 inches tall.
-
Breather for regulating temperature.
-
All wooden handles mounted on 5/8-inch steel rods.
-
Firebox top can also be used as a cooker for beans and sauces.
Large Warming Box:
-
2-ft x 2-ft x 3 ½-ft box built out of ¼-inch steel
-
Five grated, removable racks
-
Able to cook with smoke or without smoke
Temperature Gauges:
-
Constructed of stainless steel
-
3 inches in size
-
Will gauge from 50 to 550 degrees.
Workstation/Bar:
-
Stainless Steel for easy clean-up
Sinks and Holding Tanks:
-
Double-basin stainless steel sink and hand wash sink.
-
15-gallon Freshwater holding tank.
-
15-gallon grey water holding tank.
-
Shur-Flo 12-volt water pump.
-
RV water fill neck and water hose connect.
-
Everything is plumbed and ready for you to get cooking!
Electrical System:
-
50-foot, 12 gauge extension cord.
-
2 – 110-volt outlets
Temperature Control System:
-
LED Read-out thermostat
-
2 - 25 CFM Fans mounted to the firebox
-
This unit will keep the temperature consistent in your pit without lifting a finger.
-
Makes BBQ-ing a breeze.
Custom Cutting Board:
-
3’ x 3’ x ¾” restaurant grade cutting board.
-
Cutting board mounted to 36” full extension drawer slides.
-
Capacity 500 lb.
-
Lockable space below to keep everything you need securely in place.
Custom Star Burners:
-
Constructed of 3/16-inch plate steel for durability.
-
Low-pressure LP burner.
-
High-pressure needle valves.
Stainless Steel LP Grill:
-
Stainless Steel LP Grill
-
Makes grilling fast and easy
LP Fire Starter:
-
High-pressure burner welded into the firebox.
-
High-pressure needle valve.
-
This option makes getting your fire started a quick and simple task.
LP Plumbing:
-
20 PSI High-Pressure Regulator
-
20, 30, 40 lb tandem propane bottle rack. (Bottles not included)
-
Trailer plumbed with half-inch black pipe.
Utility Box:
-
Five drawer utility box for utensils, spices, and other gear.
Utensil & Paper Towel Holders:
-
Keeps your utensils and paper towels handy.
Customize your custom BBQ trailer
You can choose any of our Cook Trailers and customize it with any of our accessories or custom paint.
We specialize in creating the perfect trailer for our customers needs. when your ready to design your cusotm cook trailer you can contact us via the website or contact Clint Shockey 903-245-0039 .